JAMAR Technologies TRAX Apollyon, Руководство пользователя

Страница: 21 / 88

1-15
The other option you have for retrieving your data is by using a USB flash
drive. This is a convenient way of retrieving your data without having to ei-
ther bring the Apollyon back to your office or take a laptop into the field.
USB flash drives (also known as jump
drives) come in various shapes and
sizes and are made by many different
manufacturers. Shown here is a model
distributed by JAMAR for use with
the Apollyon, but note that just about
any recently made flash drive (2006 or
later) should work.
To retrieve data using a flash drive, plug it into the USB Memory Port of
the Apollyon, then highlight the
USB
selection on the Main Menu of the
Apollyon and press the DO key.
You will then see the USB Down-
load screen, which gives you the
option to download the data in
memory to the flash drive. To do
this, with the
Download option
flashing, press the DO key to start
the data download.
While the data is being retrieved, the display on the Apollyon will show:
When all of the data in the Apollyon has been downloaded, you will see
the message 'Transfer Complete!' on the Apollyon. It will then return to the
screen it was on before the download began.
The USB Flash drive can then be used to retrieve data from additional
counters, or taken back to the office for download into STARnext.
Chapter 1 — Introduction to the TRAX Apollyon
DOWNLOAD EXIT
v3.68
Write ALL counts to
the USB Flash Drive
USB Download Screen
TRANSFER IN PROGRESS
COUNT:01
BLOCK:000001
Sending Data...
Download in Progress
USB Flash Drive