JAMAR Technologies TRAX Apollyon, Руководство пользователя

Страница: 20 / 88

TRAX Apollyon User’s Manual
1-14
Once your Apollyon is properly connected (and the drivers have been in-
stalled), start the STARnext software and click on the
Download a TRAX
counter icon. The Download Traffic Recorder screen will then appear.
The baud rate setting determines how fast the data will be transferred into the
program. Note that the TRAX Apollyon will automatically sense whatever
baud rate you select in the software. The higher the baud rate, the faster
your data will be downloaded.
Most computers can be set for the highest
setting, 115200, so select this. Once this is set, select the comm port which
was created by the USB driver. (Refer to the Appendix for more informa-
tion on this.) STARnext will only list the comm ports that are available on
your computer, making the selection easier.
After making any needed adjustments, click on the Begin button in
STARnext and the program will attempt to connect to the Apollyon. The
traffic signal icons at the bottom of the STARnext screen provide the status
of the download.
If the connection is made, you will see a blue progress bar moving across
the STARnext screen as the data is transferred. While the data is being
downloaded, the display on the Apollyon will show:
When all of the data in the Apollyon has been downloaded, you will either
see a screen for assigning a name to your file or, if there is more than one
count, a list of counts to choose from.
Once the data has been transferred to the computer, the Apollyon display
will return to the screen it was on before the download began.
Downloaded counts will remain in the memory of the TRAX until they are
cleared, using the method we covered earlier in this tutorial.
TRANSFER IN PROGRESS
COUNT:01
BLOCK:000001
Sending Data...
Download in Progress