Jakson & Company JakPower Kirloskar Koel Green EA10 G1, Инструкция по установке, пусконаладке и эксплуатации

Страница: 24 / 36

20
JAKSON & CO.
Poor quality of fuel Change the fuel and use good quality fuel
Faulty fuel Pump Contact to KOEL Service Dealer
Incorret valve & fuel timing Contact to KOEL Service Dealer
Loose component Check and ensure all component should be
tighten.
Component fouling with any other
component Check and ensure all component should fitted
properly
Worngly adjusted valve clearances Contact to KOEL Service Dealer
Broken/worn out piston rings Contact to KOEL Service Dealer
Excessive end play in crankshaft Contact to manufacturer or KOEL Service Dealer
Incorrect bearing clearances Contact to KOEL Service Dealer
Worn out cylinder liner & piston Contact to KOEL Service Dealer
Damaged main & connecting rod bearings Contact to KOEL Service Dealer
Loose mounting bolts
Contact to manufacturer or KOEL Service Dealer
Loose flywheel/wrong adjustment Contact to manufacturer or KOEL Service Dealer
AVM pad broken or wrong fitment Replace if AVM Pad broken.
Gap between foundation and base frame
i.e. foundation level is not proper
Ensure proper foundation. Level should be proper
Fluctuation in load Uniform load should be on Genset
Faulty governor setting Contact to manufacturer or KOEL Service Dealer
Loose mounting bolts Contact to manufacturer or KOEL Service Dealer
Loose flywheel/wrong adjustment Contact to manufacturer or KOEL Service Dealer
Engine rotates very
slowly during starting Engine seized Contact to KOEL Service Dealer
Under rated battery Contact to manufacturer or KOEL Service Dealer
Canopy lampt remain in ON position Check and ensure proper use of Canopy Lamp
Faulty starter Contact to KOEL Service Dealer
Battery of wrong capacity Contact to manufacturer or KOEL Service Dealer
Loose or dislodged wiring Check wiring,it should be as per drawing and
Tightened
Battery runs down
frequently
Diesel knocking
Excessive Vibration
Mechanical Knock