Jakson & Company JakPower Kirloskar Koel Green EA10 G1, Инструкция по установке, пусконаладке и эксплуатации

Страница: 23 / 36

Water mixed with fuel Check the reason and sort out or Contact to
Engine give white
smoke
manufacturer/ KOEL service dealer
Dust entry in air inlet system Make necessary arrangement to stop dust entry
without any modification in air inlet arrangement
Dirt/ clogged air cleaner Clean air cleaner
High exhaust back pressure
manufacturer recommendation,Contact to
manufacturer
Poor quality of fuel Change the fuel and use good quality fuel
External/internal fuel leakage Check for any leakage and rectify
Faulty fuel Pump Contact to KOEL Service Dealer
Engine overloading Ensure Load as per rating or manufacturer
recommendation
Blown cylinder head gasket Contact to KOEL Service Dealer
Valve leakages Contact to KOEL Service Dealer
Incorrect valve & fuel timing Contact to KOEL Service Dealer
Injector needs adjustment Contact to KOEL Service Dealer
Engine needs overhauling Contact to KOEL Service Dealer
External/internal fuel leakage Check for any leakage and rectify
Damage or dribbling nozzle Contact to KOEL Service Dealer
Faulty fuel Pump Contact to KOEL Service Dealer
Broken/worn out piston rings Contact to KOEL Service Dealer
Worn out cylinder liner & piston Contact to KOEL Service Dealer
Incorrect valve & fuel timing Contact to KOEL Service Dealer
Injector needs adjustment Contact to KOEL Service Dealer
One or more cylinder not working Contact to KOEL Service Dealer
Dust entry in air inlet system Make necessary arrangement to stop dust entry
without any modification in air inlet arrangement
Dirt/clogged air cleaner Clean air cleaner
Wrong grade of lube oil used Change the lube oil as per KOEL specification
Excessive oil in the sump
Check and rectify lube oil level upto High mark only
External/internal fuel leakage Check for any leakage and rectify
No coolant or level low in radiator Top up with K Cool super plus
Broken/worn out piston rings Contact to KOEL Service Dealer
Worn out cylinder liner & piston Contact to KOEL Service Dealer
Dust entry in air inlet system Make necessary arrangement to stop dust entry
without any modification in air inlet arrangement
Loose wiring of sensor controller/
connection not proper
Tighten connect as per drawing
Faulty Sensor Replace sensor
Dirt/clogged air cleaner Clean air cleaner
Wrong grade of lube oil used Change the lube oil as per KOEL specification
Dirt/choked suction tube strainer Clean the tube strainer
Lube oil dilution Check and Change the lube oil as per KOEL
specification
Dirt/clogged lube oil filter Contact to KOEL Service Dealer
Clogged oil passage Contact to KOEL Service Dealer
Faulty oil pump Contact to KOEL Service Dealer
Engine overloading Ensure Load as per rating or manufacturer
recommendation
Prolonged oil change period
Engine needs overhauling
Contact to KOEL Service Dealer
Excessive oil
consumption
Mixing of Diesel
with lube oil
Low Lube oil
pressure
Excessive fuel
consumption
Contact to KOEL Service Dealer
19
JAKSON & CO.