Jakson & Company JakPower Kirloskar Koel Green EA10 G1, Инструкция по установке, пусконаладке и эксплуатации

Страница: 20 / 36

16
JAKSON & CO.
TROUBLE SHOOTING - ENGINE
Important Note - Trouble shooting points are given just for reference. Please do
contact KOEL service dealer for any check or repair.
Description Causes Remedies
No fuel in Tank Fill Fuel in tank
Air in Fuel line Vent air from fuel line
Choked fuel line Clean and clear fuel line
Dirty /clogged air cleaner Check Vaccum indicator, if red ribbon is visible then
Clean air cleaner( refer manual for cleaning)
Dirty or choked fuel filter Contact to KOEL Service Dealer
Faulty fuel Pump Contact to KOEL Service Dealer
Faulty starter Contact to KOEL Service Dealer
Engine used after a long time Check and Charge battery or Contact to KOEL
Service dealer
Battery discharged Charge the Battery
Loose or dislodged wiring Check wiring,it should be as per drawing
andTightened
Engine needs overhauling Contact to KOEL Service Dealer
Engine used after a long time Contact to KOEL Service Dealer
Engine seized Contact to KOEL Service Dealer
Engine needs overhauling Contact to KOEL Service Dealer
Faulty starter Contact to KOEL Service Dealer
Battery run down/under rating Contact to manufacturer or Service dealer
Loose or dislodged wiring Check wiring,it should be as per drawing
andTightened
Dirty /clogged air cleaner Check Vaccum indicator, if red ribbon is visible then
Clean air cleaner( refer manual for cleaning)
No fuel or Low fuel in tank Fill Fuel in tank
Poor quality of fuel Change the fuel and use good quality fuel
Air in Fuel line Vent air from fuel line
Choked fuel injector holes Contact to KOEL Service Dealer
Dirty or choked fuel filter Contact to KOEL Service Dealer
Faulty fuel Pump Contact to KOEL Service Dealer
Water mixed with fuel Check the reason and sort out or Contact to
manufacturer/ KOEL service dealer
Engine seized Contact to KOEL Service Dealer
Engine needs overhauling Contact to KOEL Service Dealer
Dust entry in air inlet system Make necessary arrangement to stop dust entry
without any modification in air inlet arrangement
Dirty /clogged air cleaner Check Vaccum indicator, if red ribbon is visible then
Clean air cleaner( refer manual for cleaning)
High exhaust back pressure Check Exhaust pipe arrangement, it should be as per
manufacturer recommendation,Contact to
manufacturer
Derating due to temp,altitide,humidity Contact to manufacturer
Poor quality of fuel
Change the fuel and use good quality fuel
Choked fuel line Clean and clear fuel line
Engine does not
start
Engine fails to start
Engine start but
stops after some
time
Engine not taking
load
Contd.