JAI GO-5000M-PMCL-UV, Руководство пользователя

Страница: 13 / 74

Item Default value
ImageFormatControl
Width 2560
Height 2048
OffsetX (horizontal position) 0
OffsetY (vertical position) 0
PixelFormat Mono8
— 13 —
GO-5000M-PMCL-UV
1
Example of changing the [Width] setting of [ImageFormatControl].
Use the Short ASCII command WTC.
You can check the current [Width] setting with WTC? <CR> <LF>.
To change the setting of [Width] to 2480, execute the following command.
WTC=2480<CR><LF>
To change the settings of other items, please use the Short ASCII command below.
2
Example of changing the [PixelFormat] setting of ［ ImageFormatControl ］ .
Step 4: Changing the Camera Settings
This section explains how to change settings by describing the procedure for changing the
output format as an example.
Configuring the Output Format
Configure the size, position, and pixel format of the images to be acquired.
The factory settings are as follows. Change the settings as necessary.
Factory default values
* You can specify the image acquisition area. For details, see “ROI (Regional Scanning Function)”.
Use the Short ASCII command BA.
You can check the current [PixelFormat] setting with BA? <CR> <LF>.
To change the setting of [PixelFormat] to Mono10, execute the following command.
BA=1<CR><LF>
Width WTC 2～2560
2 pixels/step
Height HTL 1～2048
1 lines/step
OffsetX OFC 0～2558
2 pixels/step
OffsetY OFL 0～2047
1 lines/step
PixelFormat BA 0. Mono8
1. Mono10
2. Mono12