JAI GO-5000M-PMCL-UV, Руководство пользователя

Страница: 18 / 74

— 18 —
GO-5000M-PMCL-UV
Note
1. In this table, not all tap geometry items are described. For instance, 1X4–1Y shows only 12-bit.
In case of 10-bit, upper 2 bits (D10 and D11) are not used and in case of 8-bit, upper 4 bits
(D8 through D11) are not used.
2. Please check whether the frame grabber complies with those formats if you use 80-bit
(8-tap/10-bit) camera configuration.
3. If you use 80-bit (8-tap/10-bit) camera configuration, DVAL and Exposure Active (JAI custom)
are not output through the Camera Link interface. FVAL is only output via Digital I/O-1
connector.
Camera Link pixel clock frequency
In the GO-5000M-PMCL-UV, the Camera Link pixel clock can be selected from 84.99 MHz, 72.85
MHz, 58.28 MHz, and 48.57 MHz. If the 48.57MHz clock is used, the transfer length through the
camera link cable will be extended to 10m for all tap geometries. On the other hand, the frame rate
will be reduced (see table). The default setting is 72.85 MHz.
Note: The maximum lengths shown in the above table are guidelines. Operating at these lengths
may generate bit noise, depending on the cable used.