JAI AP-1600T-PMCL Скачать руководство пользователя страница 65

Страница: 65 / 145

AP-1600T-PMCL | AP-3200T-PMCL | User Manual (Ver. 2.0)

Main Functions

- 65 -

Flat Shading

Correction is performed using the area of the screen with the highest brightness level as the reference,

and adjusting the brightness levels of the other areas to match this level.

Color Shading

R-channel and B-channel properties are adjusted by using the G-channel shading properties as a
reference.

Cautions

For FlatShading and ColorShading, the maximum amount of correction gain for all pixels is
limited to twice the amount of gain before correction. (The amount of gain cannot be
increased to more than twice the amount of gain from before correction.)

If the area in the screen with the highest brightness level is 175 LSB or less (during 10-bit
video output), proper correction is not possible.

To Use the Shading Correction Function

Configure the settings as follows.

Item

Setting Value

Description

Shading Correction
Mode

FlatShading,
ColorShading

Select the shading correction mode.

Shading Mode

User 1, User 2, User 3

Select the user area to which to save the shading correction
value.

Display a white chart under a uniform light, and execute

Perform Shading Calibration

Note:

After shading correction is executed, the shading correction value is automatically saved to

the user area selected in Shading Mode.

Содержание AP-1600T-PMCL


















































































































































Результаты поиска

Содержание AP-1600T-PMCL

Отзывы:

JAI AP-1600T-PMCL, Руководство пользователя, Страница: 65 / 145

Результаты поиска

Содержание AP-1600T-PMCL

Отзывы: