JAI AP-1600T-PMCL Скачать руководство пользователя страница 13

Страница: 13 / 145

AP-1600T-PMCL | AP-3200T-PMCL | User Manual (Ver. 2.0)

Parts Identification

- 13 -

Parts Identification

①

Lens Mount (C-Mount)

②

Mini Camera Link Connectors

③

POWER/TRIG LED

④

DC IN / Trigger IN Connector (12-pin Round)

⑤

Mounting Holes (M3, 3mm depth)

①

Lens Mount (C-Mount)

Mount a C-mount lens, microscope adapter, etc. here.

Note:

Before mounting a lens, be sure to refer to

①

Lens

and confirm the precautions for attaching

a lens and the supported lens types.

②

Mini Camera Link Connectors

Connect a cable that is compatible with Mini Camera Link (SDR) connectors here.

Note:

The cable length at which communication will be possible will be limited when using a cable

that is not compatible with Camera Link, a small diameter type cable, or a high flex type cable.

Содержание AP-1600T-PMCL


















































































































































Результаты поиска

Содержание AP-1600T-PMCL

Отзывы:

JAI AP-1600T-PMCL, Руководство пользователя, Страница: 13 / 145

Результаты поиска

Содержание AP-1600T-PMCL

Отзывы: