Jäger F120-H824.11 S11RW2V Скачать руководство пользователя

Страница: 6 / 52

Transport and packaging

Item no. 10408017, Revision 05

6 ( 52 )

Transport and packaging

Avoid strong vibrations or impacts during transportation, as these could dam-
age the ball bearings of the HF spindle.

Any damage reduces the accuracy of the HF spindle.

Any damage restricts the functionality of the HF spindle.

Any damage shortens the service life of the HF spindle.

2.1

Scope of supply of HF spindle

The following parts are supplied with the HF spindle:

High Frequency Spindle

Felt cleaning taper

Transport packaging

Check the high frequency spindle for completeness upon delivery.

2.1.1

Optional accessories

Available on request:

Spindle holder

Frequency converter

Chiller

Collet grease

Further accessories on request.

Only approved accessories have been tested for operational safety and func-
tionality.

Do not use any other accessories – this may invalidate any warranty claims
and compensation claims for damages.

If the spindle holder is to be produced in-house, it is essential to contact

Alfred Jäger GmbH

before starting production to request the tolerances

and production plan for the spindle holder.

2.1.2

Documentation supplied

The documents listed below are supplied with the HF spindle:

Manual

The declaration of incorporation is part of the manual.

Inspection protocol

Check that the documentation supplied is complete when the spindle is
delivered. If necessary, request a new copy.

Содержание F120-H824.11 S11RW2V





















































Результаты поиска

Содержание F120-H824.11 S11RW2V

Отзывы:

Похожие инструкции для F120-H824.11 S11RW2V

Бренды по названию

Популярные бренды

Jäger F120-H824.11 S11RW2V, Руководство пользователя

Результаты поиска

Содержание F120-H824.11 S11RW2V

Отзывы:

Похожие инструкции для F120-H824.11 S11RW2V

Бренды по названию

Популярные бренды