Jäger F120-H824.11 S11RW2V страница 46 Скачать руководство пользователя

Страница: 46 / 52

Dismantling

Item no. 10408017, Revision 05

46 ( 52 )

Dismantling

Proceed as follows to remove the HF spindle:

Completely disconnect the power supply.

Completely disconnect the media supply (air and liquid).

Make sure that the shaft of the HF spindle has come to an absolute stand-
still.

Remove all connections from the HF spindle.

Empty the cooling duct of the HF spindle.

Remove the HF spindle from the machine.

13.1

Disposal and environmental protection

More than 90% of the materials used in the HF spindle can be recycled (alu-
minum, stainless steel, steel, copper, etc.)

The HF spindle may not be disposed of with normal domestic waste.

Remove all non-recyclable materials.

Dispose of the HF spindle as scrap at an approved recycling facility.

Follow all rules of the responsible administrative bodies.

Do not discharge coolants into wastewater.

Dispose of cooling media in accordance with local regulations.

If the HF spindle cannot be dismantled, send the HF spindle to

Alfred Jäger

GmbH

Alfred Jäger GmbH

shall not assume the costs incurred for shipment

and the fees for the recycling facilities.

Содержание F120-H824.11 S11RW2V





















































Результаты поиска

Содержание F120-H824.11 S11RW2V

Отзывы:

Похожие инструкции для F120-H824.11 S11RW2V

Бренды по названию

Популярные бренды

Jäger F120-H824.11 S11RW2V, Руководство пользователя

Результаты поиска

Содержание F120-H824.11 S11RW2V

Отзывы:

Похожие инструкции для F120-H824.11 S11RW2V

Бренды по названию

Популярные бренды