Jaga BRIZA 12 - JFCC, Руководство пользователя

Страница: 53 / 56

53
EN
BRIZA 12 - JFCC | MANUAL | 2021.01.07
POWER 45W
INPUT: 110-240VAC
OUTPUT: 24V
N L
15120045
GND GND GND GND NTC1 V.H. V.C. 0-10V 0-10V 0-10V +24V
GND 0-10V 24V
GND 24V
GND 24V
+24V RC IN/OUT GND
Tsens 1
CONTROL PANEL
I2C RS485 A/B
CO2 PC / RF
THERMOSTATE 1
DIPSWITCH
Tsens 2
Tsens 3
Tsens 4
JAGA
1 2 3 4 5 6 7 8
ON
1. Disable power charge .
2. Press and hold down both the [-] and [+] button on the circuit board and
switch on the power again. The blue LED will light up, followed by the
green LED 2 seconds later and the red LED 4 seconds late r . Release the
buttons as soon as all 3 LEDs are flashing .
3. The controller will return to the Factory settings, all LEDs will flash for 10
seconds. The controller will return to the Factory Default settings, all LEDs
will flash for 8 seconds .
2.3. CIRCUIT BOARD ERROR CODE
Error sensor [B]/[C] - Check the water temperature
sensor
Error sensor [J] - Check the room temperature sensor
2 MODE 3 1
2 MODE 3 1
DECLARATION OF CONFORMITY
JAGA N.V. - Verbindingslaan 16 - B 3590, declares under its sole responsibility that the
product to which this declaration relates:
is in conformity with the following standards or documents provided that these are used in
accordance with our instructions:
Following the provision of Directives as amended:
- Low Voltage 2014/35/EC
- EMC 2014/30/EC
- Machinery 2006/42/EC
CEO JAGA N.V.
Jan Kriekels
BRIZA 12 / JRT-100 / JRT-100TW
NBN EN 6061010-1 BASED ON EN61010-1:2010 / EN60730-2-9:2010
USED IN CONJUNCTION WITH EN60730-1:2011
26/03/2018
POWER 45W
INPUT: 110-240VAC
OUTPUT: 24V
N L
15120045
GND GND GND NTC1 V.C. 0-10V +24V
GND 0-10V 24V
GND 24V
GND 24V
+24V RC
Tsens 1
CONTROL PANEL
I2C RS485 A/B
CO2 PC / RF
Tsens 2
1 2 3 4
ON
T
CONTROL PANEL
Ts
2.4. FACTORY RESET
3. DECLARATION OF CONFORMITY