Jadever JIF-2002, Руководство пользователя

Страница: 29 / 67

JIF-2002 WEIGHING INDICATOR&CONTROLLER
29
F 502 Loss-in-weight Absolute Value
0 Not read Absolute Value
1 BDI-2002 reads Absolute Value
F 503
Output current when display ZERO
0.0mA through 9.99mA
●
Initial 4.0mA
F 504 Output current at Full Capacity
0.0mA through 9.99mA
●
Initial 20.0mA
F 505
Output Volt when display ZERO
-2.5V t59.9V
●
Initial 00.0 V
F 506 Output Volt at Full Capacity
-2.5V t59.9V
●
Initial 10.0 V
4-3 CALIBRATION
1. Select FULL CALIBRATION
：
STEP 1:
Turn the Power Switch OFF on the rear panel. Slide the SET
switch to the set side .
STEP 2:
Turn the power switch ON. The screen will show blinking
SELECT.
STEP 3:
Please press GROSS/NET key and a blinking CAL will show
on the screen. Then press the
↵
key.
STEP 4:
The screen will show F-CAL . Please press the
↵
key.