background image

50

J-445/J-435 Export

A. 

Cleaning the filters and filter bag

To ensure optimum performance:

1.  The ProClarity™ filter cartridge (A) must be 

cleaned every month and replaced every 18 

months.

2.  The ProClarity Depth filter (B) must be replaced 

every 3 months.

3.  The ProClarity filter canister (C) can be rinsed 

when the filters are cleaned.

4.  The ProClear II skimming filter cartridge (D) 

must be cleaned every month and replaced 

every 18 months.

5.  The ProClarity debris bag (E) should be checked and 

emptied monthly.

To accomplish this, refer to the following filter cleaning 

procedure. The circulation pump filter goes on the side that 

has the wall fitting with the grids, Figure 13.1b.

Note:

 Do not attempt to wash the ProClarity depth filter (B) 

and the ProClear/ProClarity debris bag (E) or it will come 

apart!

B. 

Cleaning the Filters/Debris bag:

A

  

DANGER:

 TURN POWER TO SPA OFF! TO DECREASE 

RISK OF DEATH, DROWNING, OR ENTRAPMENT, NEVER 

OPERATE SPA WHEN FILTER IS NOT PROPERLY INSTALLED 

OR IF SKIMMER ASSEMBLY IS DAMAGED OR ALTERED!

B

(Spa 

Shell)

Lift the cover upward to 

access filter cartridges.

C

Remove the ProClarity 

debris bag from clips 

and then clean out 

debris.

D

(Spa Shell)

Rotate each filter 

cartridge handle 

counterclockwise to 

unthread from mating 

wall fitting.

A

B

C

D

E

Figure 13.1b

Debris 

 Bag

Содержание J-435

















































































Отзывы: