Jacuzzi J-435, Руководство пользователя

Страница: 60 / 80

54
J-445/J-435 Export
A.
Draining procedures for the Quick Drain:
1. Turn off power to hot tub at breaker.
2. Locate the Quick Drain Valve, Figure 13.2g.
3. Unscrew drain valve cap (Figure 13.2h). Place the
cap aside.
4. Screw in the adapter with hose that was included in
the equipment bay. Attach it to the quick drain (Figure
13.2i). Make sure to direct the hose to an area where
the water will drain properly.
5. Open the drain slice valve by sliding the handle to the
side and pulling up.
Note:
If the QuickDrain is slow, remove the circulation
pump filter to ease the flow.
6. After the hot tub has drained, close the slice valve by
pushing it downward and sliding the handle to the side.
Remove the adapter and reinstall the Quick drain cap
before refilling hot tub.
7. To reinstall the panel and foam boards (J445 only) just
follow the steps above in reverse order.
B. To drain your spa, perform the following steps (standard drain):
1. Turn off power to spa at breaker.
2. Locate the drain valve located on the front left
corner on the black plastic pan. Hold the larger
(rear) drain valve body to prevent it from turning,
then loosen and remove the front cap to expose
the underlying male hose threads, Figure 13.2j.
3. Attach a garden hose to the exposed threads, Figure
13.2k.
4. Gently rotate the larger (rear) valve body 1/3 turn
counterclockwise to unlock the drain valve, Figure
13.2l.
5. Pull the larger (rear) body outward as shown
to open drain, Figure 13.2m.
6. After the spa drains, perform steps 2-5 in reverse
order to close the drain prior to refilling spa.
After refilling, turn on power to the spa and follow the steps
listed under “Spa Fill Up Procedures” (page 18). Always fill
your spa through both filter buckets.
13.3 Cleaning the Spa Interior
To preserve the sheen of your spa’s surface, it is crucial that you avoid
using abrasive cleaners or cleaners which have adverse chemical effect
on the surface. If you are not certain as to the suitability of a particular
cleanser, consult your authorized Jacuzzi dealer. We recommend using
Jacuzzi’s Spa All Purpose Cleaner to clean the spa’s interior surface.
Use extreme care to assure that no soap residue is left on the surface.
This could cause severe sudsing when the spa is refilled. Jacuzzi
chemicals are for use in the U.S. only.
Figure 13.2g
A
Figure 13.2h
Figure 13.2i
Figure 13.2m
Figure 13.2l
Figure 13.2k
Figure 13.2j