Jacuzzi J-135 Скачать руководство пользователя

Страница: 47 / 60

J-100

14.9 Panel Displays FL--2

“FL--2”

display means the flow switch is malfunctioning

closed. The spa heater will deactivate and jets pump #1 may

also deactivate. Contact your authorized Jacuzzi dealer or qualified

service technician. The display will alternate between

“FL--2,”

scrolling

message

“FLOW ERROR CLOSED”

and the current water temperature.

14.10 Panel Displays FL--3

“FL--3”

display means the flow switch is behaving

erractically. The spa heater will deactivate and jets pump #1

may also deactivate. Contact your authorized Jacuzzi dealer or qualified

service technician. The display will alternate between

“FL--3,”

scrolling

message

“FLOW ERROR TOGGLE”

and the current water temperature.

14.11 Panel Displays OH

WARNING:

RISK OF HYPERTHERMIA (OVER-HEATING)

CAUSING SEVERE INJURY, BURNS, OR WELTS.

Water temperature is above acceptable limits.

DO NOT

ENTER SPA!

Water temperature has reached 112°F (44°C).

The pump 1 low speed activates to circulate water through the

heater. Contact your authorized Jacuzzi dealer or qualified service

technician. The display will alternate between

“*OH*”

and the current

water temperature.

Note:

As a safety measure, the red lights of the spa will flash on and off

as an indication that the spa is an overheat condition.

To correct condition:

• Remove the spa’s cover and allow your spa to cool down.

• Program the heater settings for Economy Mode (page 30).

• If the condition persists, contact your authorized Jacuzzi dealer.

14.12 Panel Displays (-- -- -- --)

WARNING:

RISK OF HYPERTHERMIA (OVER-HEATING)

CAUSING SEVERE INJURY, BURNS, OR WELTS.

Water temperature is above acceptable limits.

DO NOT

ENTER SPA!

The safety “Watchdog” software has been

triggered and the spa is deactivated. A problem has been

detected which could cause damage to the spa or its components. The

display will alternate between

“-- -- -- --”

and the scrolling message

“WATCHDOG CALL FOR SERVICE”

as long as the error exists.

Contact your authorized Jacuzzi dealer or qualified service technician.

Note:

As a safety measure, the red lights of the spa will flash on and off

as an indication that the spa is in watchdog condition.

Содержание J-135





























































Результаты поиска

Содержание J-135

Отзывы:

Похожие инструкции для J-135

Бренды по названию

Популярные бренды

Jacuzzi J-135, Руководство пользователя

Результаты поиска

Содержание J-135

Отзывы:

Похожие инструкции для J-135

Бренды по названию

Популярные бренды