Jacuzzi J-135 Скачать руководство пользователя страница 46

Страница: 46 / 60

J-100

14.3 Panel Displays SN--1

Open sensor (heater is disabled) or shorted sensor (spa is

deactivated). The high-limit temperature sensor is not functioning.

Contact your authorized Jacuzzi dealer or qualified service technician.

The display will alternate between

“SN--1”,

scrolling message

“HI-LIMIT

SENSOR ERROR”

and the current water temperature.

14.4 Panel Displays SN--2

Open or shorted sensor (heater disabled). The temperature

sensor is not functioning. Contact your authorized Jacuzzi dealer or

qualified service technician. The display will alternate between

“SN--2”,

scrolling message

“WATER SENSOR ERROR”

and the current water

temperature.

14.5 Panel Displays Change CLEARRAY Bulb

The display will alternate between the current temperature reading and the

scrolling message

“CHANGE CLEARRAY BULB”

as long as the error

exists. The countdown timer for the UV bulb needs to be turned off.

1. Press

until you get to the

“

”

Menu. The display will scroll

“

CLEARRAY BULB

.”

After the second scroll, if no action is taken,

the system will revert back to the Main Menu.

2. Press

to prepare the system for changes. Continually

press until you see “OFF” on the display.

14.6 Panel Displays Change Filter

The filter change timer has expired. The spa filters need to be cleaned

or replaced. The display will alternate between the current temperature

reading and the scrolling message

“CHANGE FILTER”

as long as the

error exists. The countdown timer for the Change Filter feature needs to

be reset (page 36). New filters can be purchased from a local Jacuzzi

dealer.

14.7 Panel Displays Change Water

The water refresh timer has expired. The spa needs to be drained and

refilled. The display will alternate between the current temperature

reading and the scrolling message

“CHANGE WATER”

as long as the

error exists. The countdown timer for the Change Water feature needs to

be reset (page 31).

14.8 Panel Displays FL--1

“FL--1”

display means the flow switch is malfunctioning

open, the filter cartridge is excessively dirty or an “air lock”

condition has occurred at the pump intake. The spa heater will deactivate

and jets pump #1 may also deactivate. Contact your authorized Jacuzzi

dealer or qualified service technician. The display will alternate between

“FL--1,”

scrolling message

“FLOW ERROR OPEN”

and the current

water temperature.

Содержание J-135





























































Результаты поиска

Содержание J-135

Отзывы:

Похожие инструкции для J-135

Бренды по названию

Популярные бренды

Jacuzzi J-135, Руководство пользователя

Результаты поиска

Содержание J-135

Отзывы:

Похожие инструкции для J-135

Бренды по названию

Популярные бренды