Jacobsen Greens King 500A 63281 Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 60

background image

MAINTENANCE 8

27

8

MAINTENANCE

8.1 GENERAL ________________________________________________________________

1.

Adjustment and maintenance should always be
performed by a qualified technician. If proper
adjustments cannot be made, contact an Authorized
Jacobsen.

2.

Inspect the equipment on a regular basis, establish
a maintenance schedule, and keep detailed records.

a.

Keep the equipment clean.

b.

Keep all moving parts properly adjusted and

lubricated.

c.

Replace worn or damaged parts before operating

the machine.

d.

Keep all fluids at their proper levels.

e.

Keep shields in place and all hardware securely

fastened.

f.

Keep tires properly inflated.

3.

Long hair, jewelry, or loose fitting clothing may get
tangled in moving parts.

4.

Use the illustrations in the Parts Catalog as
reference for the disassembly and reassembly of
components.

5.

Recycle or dispose of all hazardous materials
(batteries, fuel, lubricants, anti-freeze, etc.)
according to local, state, or federal regulations.

6.

Wash the mower and accessories after each use.
Keep the equipment clean.

7.

Repair damaged metal surfaces and use Jacobsen
Orange touch-up paint.

8.2

ENGINE _________________________________________________________________

IMPORTANT:

A separate Engine Manual, prepared by

the engine manufacturer, is supplied with this machine

.

Read the engine manual carefully until you are familiar
with the operation and maintenance of the engine.
Proper attention to the engine manufacturer’s directions
will assure maximum service life of the engine. To order
replacement engine manuals contact the engine
manufacturer.

The proper break-in of a new engine can make a
considerable difference to the performance and life of the

engine.

During the break-in period, Jacobsen recommends the
following:

1.

Operate machine modestly for the first 25 hours at
reduced engine speed.

2.

Avoid full throttle starts and rapid acceleration.

3.

Allow the engine to reach operating temperature before
operating at full load.

4.

Change the engine oil after the first 20 hours of
operation.

5.

Refer to Section 10.2 and Engine Manual for
specific maintenance intervals.

WARNING

Before you clean, adjust, or repair this equipment,
disengage all drives, engage parking brake, and stop
engine to prevent injuries.

Whenever performing maintenance other than
carburetor adjustments, remove the spark plug wire,
and place the wire away from the plug to prevent
accidental starting and bodily injury.

!

NOTICE

The mower is designed to operate and cut most
efficiently at the preset governor setting. Do not change
the engine governor settings or overspeed the engine.

«
...
25
26
27
28
29
...
»

Содержание Greens King 500A 63281





























































Отзывы:

Нет отзывов

Похожие инструкции для Greens King 500A 63281

Бренд: Jacobsen Страницы: 114

Бренд: Bad Boy Страницы: 52

Бренд: Baroness Страницы: 199

Бренд: Walker Страницы: 60

MULTICLIP Pro 51 S

Бренд: Stiga Страницы: 10

Бренд: McCulloch Страницы: 20

Бренд: Ryobi Страницы: 8

Бренд: Qualcast Страницы: 20

Бренд: elem Страницы: 99

Бренд: Yard-Man Страницы: 10

Бренд: HUSTLER Страницы: 40

Бренд: Cobra Garden Machinery Страницы: 20

Бренд: Poulan Pro Страницы: 17

Бренд: Toro Страницы: 64

Бренд: Partner Страницы: 10

Lawn Chief 13AE450F022

Бренд: True Value Страницы: 20

Бренд: American Страницы: 8

Бренд: EMAK Страницы: 171

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды