Jacobsen Greens King 500A 63281 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 60

background image

SAFETY 1

5

1.2

IMPORTANT SAFETY NOTES ________________________________________________

This safety alert symbol is used to alert you to potential hazards.

DANGER

- Indicates an imminently hazardous situation which, if not avoided,

WILL

result in death or serious injury.

WARNING

- Indicates a potentially hazardous situation which, if not avoided,

COULD

result in death or serious

injury.

CAUTION

- Indicates a potentially hazardous situation which, if not avoided,

MAY

result in minor or moderate injury

and property damage. It may also be used to alert against unsafe practices.

NOTICE

- Indicates a potentially hazardous situation which, if not avoided,

MAY

result in property damage. It may

also be used to alert against unsafe practices.

For pictorial clarity, some illustrations in this manual may show shields, guards or plates open or removed. Under no
circumstances should this equipment be operated without these devices securely fastened in place.

By following all instructions in this manual, you will prolong the life of your machine and maintain its maximum
efficiency. Adjustments and maintenance should always be performed by a qualified technician.

If additional information or service is needed, contact your Authorized Jacobsen Dealer who is kept informed of the
latest methods to service this equipment and can provide prompt and efficient service.

WARNING

The Operator Presence Control (OPC) on this machine will shut off the reel
and traction drive if the operator releases the OPC bail.

To protect the operator and others from injury, never operate equipment with
the OPC system disconnected or malfunctioning.

!

WARNING

1.

Before leaving the operator’s position for any reason:

a.

Disengage all drives.

b.

Engage parking brake.

c.

Stop engine.

2.

Keep hands, feet, and clothing away from moving parts. Wait for all
movement to stop before you clean, adjust or service the machine.

3.

Keep the area of operation clear of all bystanders and pets.

4.

Chock or block the wheels if the machine is left on an incline.

5.

Never operate mowing equipment without the discharge deflector
securely fastened in place.

!

«
...
3
4
5
6
7
...
»

Содержание Greens King 500A 63281





























































Отзывы:

Нет отзывов

Похожие инструкции для Greens King 500A 63281

Бренд: MTD Страницы: 12

Бренд: Echo Страницы: 244

Бренд: Yard-Man Страницы: 10

Garden Mark ZYJ-197A

Бренд: Montgomery Ward Страницы: 12

Бренд: Toro Страницы: 28

Бренд: Wolf Garten Страницы: 14

Бренд: Lastec Страницы: 88

Flymo Micro Compact 300 Plus

Бренд: Electrolux Страницы: 12

Бренд: MTD Страницы: 32

Бренд: Kubota Страницы: 315

Yard Cruiser HZS15423KVE

Бренд: Snapper Страницы: 128

Бренд: Electrolux Страницы: 20

Бренд: Electrolux Страницы: 6

Бренд: Sabo Страницы: 99

Бренд: Sabo Страницы: 114

Бренд: EMAK Страницы: 118

Бренд: Craftsman Страницы: 20

Бренд: Craftsman Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды