Jacobsen GA580, Техническое руководство

Страница: 8 / 68

2 SAFETY
en-7
2.1.4 PTO
a When the PTO rotates, contact with the PTO shaft can cause injury or death. Never stand on, step over, lean
across or crawl under an engaged PTO shaft.
b Read the tractor’s operator manual.
c Correctly attach the PTO shaft at both ends.
d Connect the PTO chains to both the tractor and the aerator to prevent PTO shield rotation. Immediately replace
damaged or missing chains or guards.
e Never remove the PTO shaft guards. If the removal of a guard is necessary for maintenance or repair, replace the
guard when completed. Never operate the PTO without the guards.
f Disengage the PTO and stop the tractor engine before you leave the operator position for any reason.
g Do not engage or disengage the PTO from behind the tractor. Engage and disengage the PTO from the tractor
seat.
h The friction clutch can become hot during use. Keep the area around the clutch without any material which can
catch fire. Correctly adjust the clutch to prevent slipping.
i When you operate the aerator, do not wear loose clothes or jewelry. Always tuck in your shirt. Always remove the
drawstrings from jackets, hooded sweat shirts and pants before you operate the aerator.
j The PTO shaft tubes must overlap for at least 1/3 of their length.
k Never stand on shields or guards. Objects can become stuck in the PTO shaft joints.
l Do not stand between the tractor and the aerator with the engine in operation.
m Do not operate the PTO without the aerator roller on the ground.
n When the PTO shaft is more than 25° from the horizontal position, do not operate the PTO. Damage to the PTO
shaft will occur.
o When the PTO shaft is not attached to the tractor, keep the PTO shaft horizontal to prevent the two halves from
move away from each other.
p When not installed do not use the safety chains to move or store the PTO shaft.
DANGER
ROTATING DRIVELINE
Contact can cause death.
• Do not operate the PTO without all PTO shaft guards and equipment shields in
place
• Correctly attach the PTO shaft at both ends.
• Stay away from parts that move.
!