background image

i

REVISION

REVISION

DATE

MADE

BY

APPLICABLE

ECN

DETAILS

F

06-01-04

MAW

N/A

Change to new layout.

G

05-20-05

MAW

N/A

Corrected amperage ratings, changed to thermostat bracket
05700-011-81-64, changed thermostat 05930-121-71-29 to ther-
mostat kit 06401-140-00-32, updated drawing for false panel
installation, and added SDI override instructions.

H

01-17-06

MAW

7609

Added universal timer, parts & schematics.

I

07-06-06

MAW

7713, 7571
7493, 7553

7411, 7422

7231

Updated specification & dimension pages. Updated drain quench
assembly. Replaced door switch 05930-003-02-20 with 05930-
003-05-84. Added false panel kit numbers, door component kits.
Replace ball stop components. Replace thermostat 05930-121-
71-29 with 05930-510-03-79. Added the wash & rinse thermome-
ter decals.

J

09-14-07

MAW

Obsoleting I/O manual, added warranty and repair centers info.
Listed minimum cycle times. Added Top Mount Control Box:
dimensions, hood weldment, control box, and schematics.
Corrected the rinse tank cover number, updated the cantilever
support bracket and reed switch numbers. 

Содержание TempStar HH












































































Отзывы: