manualshive.com logo in svg

Jackson Labs RSR GNSS Transcoder, Руководство пользователя

Поделиться
Скачать
Jackson Labs RSR GNSS Transcoder Скачать руководство пользователя страница 59

© 2017 Jackson Labs Technologies, Inc.

49

RSR GNSS Transcoder™ User Manual

where <duration> is in seconds, and C is constant heading and G is great circle.
As of the release of this manual Motion Control Language commands are not supported. Future 
releases of the RSR GNSS Transcoder™ firmware will included support for the Motion Control 
Language.

4.3.21.4 Accelerate

The Accelerate command specifies a period of level motion at the current heading for the specified 
duration and positive or negative change in speed.
The format of this command is:

ACCEL,<duration>,<change in speed>

where <duration> is in seconds and <change in speed> is in m/s.
As of the release of this manual Motion Control Language commands are not supported. Future 
releases of the RSR GNSS Transcoder™ firmware will included support for the Motion Control 
Language.

4.3.21.5 Turn

The Turn command specifies a period of level motion at the current speed with the specified heading 
change and lateral acceleration. The combination of the current speed and lateral acceleration will 
determine the radius of the curve and the time required to complete the turn.
The format of this command is:

TURN,<heading change>,<lateral acceleration>

where <heading change> is in degrees and <lateral acceleration> is in g (1 g = 9.81 m/s

2

).

As of the release of this manual Motion Control Language commands are not supported. Future 
releases of the RSR GNSS Transcoder™ firmware will included support for the Motion Control 
Language.

4.3.21.6 Climb

The Climb command specifies a period of increase or decrease in altitude at the current constant 
heading and speed. The parameters specified include the change in height, height rate, lateral 
acceleration at the start and lateral acceleration at the end.
The format of this command is:

CLIMB,<change in height>,<height rate>,<lateral accel start>,<lateral accel end>

where

<change in height> is in m,
<height rate> is in m/s,
<lateral accel start> is in m/s

2

, and

<lateral accel end> is in m/s

2

.

As of the release of this manual Motion Control Language commands are not supported. Future 

releases of the RSR GNSS Transcoder™ firmware will included support for the Motion Control 
Language.

Содержание RSR GNSS Transcoder

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды