manualshive.com logo in svg

Jackson Labs RSR GNSS Transcoder, Руководство пользователя

Поделиться
Скачать
Jackson Labs RSR GNSS Transcoder Скачать руководство пользователя страница 100

RSR GNSS Transcoder™ User Manual

90

© 2017 Jackson Labs Technologies, Inc.

 

4.11.19 INTGPS:JAMlevel?

This command provides a signal jamming-indicator from the internal monitoring GNSS receiver. 
The internal GNSS receiver will detect, and flag jamming interference with levels ranging from 0 (no 
jamming) to 255 (strong jamming). Normally the jamming level is low on a correctly operating RSR 
GNSS Transcoder™.

4.11.20 INTGPS:FWver?

This command queries and returns the Firmware version used inside the internal monitoring uBlox 
GNSS receiver.

4.11.21 INTGPS?

This query displays the configuration, position, speed, height and other relevant data of the internal 
monitoring GNSS receiver in one convenient location.

4.12 PTIME Subsystem

The PTIME subsystem groups all the commands related to the management of the internal RTC time 
including simulation time when running in the Continuous simulation time mode. Please note that the 
RSR GNSS Transcoder™ does not contain a battery-backup to maintain RTC time/date, thus the 
time/date is lost when power is removed, or when the unit is reset.
The list of the commands supported is the following:

PTIMe:DATE?
PTIMe:TIME?
PTIMe:TIME:STRing?
PTIMe:TINTerval?
PTIME:OUTput <on|off>
PTIMe:LEAPsecond?
PTIMe:LEAPsecond:PENDing?
PTIMe:LEAPsecond:ACCumulated?
PTIMe:LEAPsecond:DATE?
PTIMe:LEAPsecond:DURation?
PTIME?

4.12.1 PTIMe:DATE?

This query returns the current calendar date. The local calendar date is referenced to UTC time. The 
year, month, and day are returned.

Содержание RSR GNSS Transcoder

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды