jablotron JA-82Y, Руководство по установке, Страница: 10 / 13

The JA-82Y GSM communicator installers manual 10/13 MDL51109
11. List of events which can be reported to your phone and their factory default settings
uu Event
Telephone number memory - M
ABC AC BC ABC
1 2 3 4 5 6 7 8 Voice message
00 Alarm after powering up the system
SC SC SC S SC SC S
5: “fault“
01 Instant loop alarm SC SC SC S SC SC S
1: “intruder alarm“
02 Delayed loop alarm SC SC SC S SC SC S
1: “intruder alarm“
03 Fire alarm SC SC SC S SC SC S
2: “fire alarm“
04 Panic alarm SC SC SC S SC SC S
4: “panic alarm“
05 Tamper alarm SC SC SC S SC SC S
3: “tamper alarm”
06 Number of permitted incorrect code-entries exceeded SC SC SC S SC SC S
3: “tamper alarm”
07 Device fault S S
5: “fault“
08 Complete setting
”Armed system“
09 Complete unsetting
”Disarmed system“
12 Codeless setting
”Armed system“
13 Partial setting A
”Partially armed“
14 Detector communication failure
5: “fault“
15 Control panel power supply dropout
7: “other event“
16 Control panel power supply restored
7: “other event“
17 Detector power supply dropout S S
5: “fault“
18 Communicator failure S S
5: “fault“
19 Communicator OK
7: “other event“
20 Control panel battery failure S S
5: “fault“
21 Control panel battery OK
7: “other event“
23 Alarm 24h SC SC SC S SC SC S
1: “intruder alarm“
24 Receiver jamming
5: “fault“
26 Setting A
– split system ”Armed system“
27 Setting B
– split system ”Armed system“
28 Unsetting A
– split system ”Disarmed system“
29 Unsetting B
– split system ”Disarmed system“
33 Partial setting AB
”Partially armed“
50 Low SIM card credit balance S
5: “fault“
51 Image delivered to server (e.g. from JA-84P) S
7: “other event“
64 Power supply ON 7
: “other event“
65 Switching to service / maintenance mode
7: “other event“
66 Exiting service / maintenance mode
7: “other event“
67 End of alarm indication
7: “other event“
78 Alarm cancelled by user S S S S S S S
7: “other event“
79 Control panel reset
7: “other event“
80 All tampers on standby
7: “other event“
81 All faults removed
7: “other event“
82 System power supply OK
7: “other event“
83 The communicator has no connection
5: “fault“
84 Communicator connection restored
7: “other event“
85 Master code reset to 1234
7: “other event“
86 Master code changed
7: “other event“
68 Reporting to ARC1
7: “other event“
69 No reporting to ARC1
5: “fault“
89 Power supply failure exceeding 30 minutes S
5: “fault“
90 Unconfirmed alarm
7: “other event“
91 Service request
7: “other event“
92 PgX output ON
7: “other event“
93 PgX output OFF
7: “other event“
94 PgY output ON
7: “other event“
95 PgY output OFF
7: “other event“
96 Blocking after an alarm (Engineer reset)
7: “other event“
97 Unblocking after an alarm
7: “other event“
tab. 5 List of events which can be reported to your phone and their factory default settings
Notes:

Factory default report assignment: S = SMS, C = call, SC = SMS followed by a call

“External communication fault“ means a GSM network dropout longer than 15 minutes (if GSM network dropout indication is enabled)

To get an SMS (from the JA-84P) with a picture link, enable event 51

In a split system it is necessary to synchronize the current control panel settings by opening enrollment mode for 1 s and closing it before you leave service mode

In a split system telephone memory positions are associated with certain sections for reporting alarms as below:
o
1st telephone number: sections A, B, C (administrator/master)
o
2nd to 4th telephone numbers: sections A, C
o
5th to 7th telephone numbers: sections B, C
o
8th telephone number sections: A, B, C (service technician)