- 14 -
7. Advanced
Security detectors
The EyeSee uses advanced technology and 7 types of detectors to recognize movements,
sounds, vibrations, breaking of glass or opening of doors in a protected area.
Detectors’.settings.are.professionally.tuned.to.provide.the.best.quality.of.detection.while.keeping.
sufficient.resistance.against.false.alarms..The.installation.wizard.configures.the.detectors.according.
to.your.planned.use.of.your.camera.(indoors/outdoors).
Note: Please note that some of the detectors are designed for indoor use and using them outdoors may cause
unwanted false alarms – i.e. noise detector may be triggered by wind.
Detectors.are.optimized.to.protect.an.area.up.to.10.x.10.meters.
Infrared motion detector (PIR)
is.a.very.sensitive.detector.of.thermal.
activity..It.detects.the.heat.of.a.human.
body.or.the.hot.engine.of.a.car.
Tilt detector (TILT)
notices.even.very.small.change.
of.camera´s.position,.e.g..during.
unwanted.manipulation.with.the.
camera..This.is.reported.as.tampering.
alarm.
Motion-In-Picture detector (MIP)
constantly.analyses.the.scene.and.
detects.any.changes.in.the.picture..You.
can.mask-out.(hide).a.part.of.a.picture.
where.changes.will.not.be.detected.(e.g..
street.traffic,.window).
Touch detector (TOUCH)
.
responds.to.micro.vibrations.of.
camera.body.caused.e.g..by.touching.
the.camera.by.hand..Touch.detector.
should.be.switched.off.outdoors..This.
is.also.reported.as.tampering.alarm.
Glass break detector (GBS)
permanently.listens.to.all.sounds.and.
digitally.determinates.the.characteristics.
of.window.breaking..It.should.be.used.
for.indoor.installations.only.
Noise detector (NOISE)
.
uses.a.microphone.to.check.the.
surrounding.area.for.any.sound.above.
the.usual.level..
Door opening detector (DOOR)
.
sensitively.checks.the.small.pressure.changes.which.are.characteristic.mark.of.door.or.
window.opening..It.should.only.be.used.indoors.
The.sensitivity.of.each.detector.may.be.tuned.in.JabloTool.com.(Settings/Advanced/Detectors)..You.
may.even.completely.disable.some.detectors.if.needed.
When.any.of.the.detectors.is.activated.while.EyeSee.is.Watching.then.the.camera.starts.recording.
video.and.reports.alarm.
SD card
The.EyeSee.records.video.on.a.SD.memory.card..It.comes.with.a.2.GB.memory.card.
installed,.that.allows.to.store.about.3.hours.of.continuous.video.record..Thanks.to.
sophisticated.method.of.recording,.when.only.moving.parts.of.image.are.saved,.the.real.
recording.time.is.much.longer..Usually.the.camera.stores.about.three.days.history..
Tips:
•.
The.EyeSee.automatically.overwrites.the.oldest.records..Your.SD.card.never.gets.full.
•.
The.size.of.one.frame.(single.picture.in.film.strip).fluctuates.from.40.to.80.kB..Night.pictures.
are.usually.twice.as.large.as.a.day.picture.
•.
If.needed,.you.can.further.extend.recording.time.by.SD.card.upgrade.(up.to.32.GB.micro.SD)..
Please.see.support.jablocom.com./eyesee.for.detailed.instructions.
