- 8 -
3. Basics
There.are.two.working.modes.for.the.EyeSee.
WATCHING
SLEEPING
Watches the protected area
and detects activity
Does not watch the protected
area. Protects just itself from
tampering
Video records activity
Does not video record (Unless
it is selected by you.)
Sends out alarm reports
Does not send out alarm
reports
LED Lights
There.are.RED.and.GREEN.signal.LED.lights.on.camera’s.front.panel:
Flashing GREEN
EyeSee.is.busy,.finishing.some.command,.please.wait.
Continuous GREEN
SLEEPING.mode.(stand-by)..Entering.SLEEPING.mode.is.
confirmed.by.two.audible.beeps.
No lights
WATCHING.mode..Camera.will.detect.any.activity.and.report.it.to.
the.user..Entering.this.mode.is.confirmed.by.one.audible.beep.
Note: The WATCHING mode could be confused with the state when camera is
completely off. Remember that the camera shutdown is always confirmed by two
downwards tones.
Flashing RED
Camera.is.recording.video..This.allows.people.in.the.protected.area.
to.know.they.are.being.recorded.in.order.to.protect.their.privacy...
Each.possible.recording.is.clearly.indicated..However.if.you.prefer.
to.hide.your.camera.you.can.completely.disable.this.warning.
Continuous RED
Continuous.RED.light.indicates.some.serious.error..Refer.to.the.
TROUBLESHOOTING.chapter
Acoustics
WATCHING
now
SLEEPING
now
OK, Accepted,
Confirmed
Delay.
WATCHING will
start shortly.
Starting
Shutting down
