Jabbla Tellus 6, Руководство по эксплуатации

Страница: 32 / 42

Tellus 6 / Tellus i6
7 Starting up the device using a switch
The device can be started up using switch 1. You can specify how long to hold and press switch 1 before the device starts
up.
1.
Right-click Tellus6 in the system tray in the Windows taskbar and select Options from the shortcut menu.
2. Select one of the following options from the
Switches
options group,
Switch 1 starts device
drop-down list:
• <Don't start>
, the device cannot be started up using a switch.
•
Immediately , the device starts up immediately after pressing switch 1.
•
You can specify the number of seconds to hold and press switch 1 before the device starts up.
3. Click
OK
.
See also
Setting up the switches on page 30
Testing the switches on page 30
8 Setting up the switches
You can link an action to the switches. The action is then performed by pressing the switch. For example: left click, right
click, send letter or number, ...
1.
Right-click Tellus6 in the system tray in the Windows taskbar and select Options from the shortcut menu.
2. Select one of the following options from the
Switches
options group,
Switch 1
drop-down list:
• <Normal>
, the switch performs the function that has been specified in Mind Express.
•
Leftclick , the switch performs a left-click action.
•
Rightclick , the switch performs a right-click action.
• A keyboard key (alphanumeric keys, navigation keys, numeric keys and function keys), the switch performs the
action of pressing a key.
3. Repeat step 2 to set up Switch 2 .
4. Click OK .
See also
Starting up the device using a switch on page 29
Testing the switches on page 30
9 Testing the switches
You can carry out a test to check whether the switches have been connected correctly and are working properly.
1.
Right-click
Tellus6
in the system tray in the Windows taskbar and select
Options
from the shortcut menu.
2. Press switch 1.
If operating correctly, the light in the left circle will be green.
3. Press switch 2.
If operating correctly, the light in the right circle will be green.
4. Click
OK
.
See also
Starting up the device using a switch on page 29
Setting up the switches on page 30
F Settings
30
8 Setting up the switches