Jabbla Tellus 6, Руководство по эксплуатации

Страница: 31 / 42

Tellus 6 / Tellus i6
2 Switching the loudspeakers on or off
When the device is switched on, by default the speakers are on.
1.
Right-click Tellus6 in the system tray in the Windows taskbar and select Options from the shortcut menu.
2. Click on one of the following buttons next to
Speakers
:
• On
, to switch on the speakers of the Tellus.
•
Off , to switch off the speakers of the Tellus.
3. Click OK .
See also
Setting the volume amplification factor on page 29
3 Setting the volume amplification factor
You can additionally amplify the volume set in Windows.
1.
Right-click
Tellus6
in the system tray in the Windows taskbar and select
Options
from the shortcut menu.
2. Slide the Speaker boost slider to the right to boost the volume. Slide the slider to the left to decrease the
amplification. You can only lower the volume to the set Windows volume.
3. Click OK .
See also
Switching the loudspeakers on or off on page 28
4 Switching the headphones on or off
When the device is switched on, by default the sound is sent to the headphones.
1.
Right-click Tellus6 in the system tray in the Windows taskbar and select Options from the shortcut menu.
2. Click on one of the following buttons next to
Headphones
:
• On
, to send the sound to the headphones.
•
Off , to NOT send the sound to the headphones.
3. Click
OK
.
5 Eye control pausing by activating and setting up gaze (Tellus i6)
1.
Right-click Tellus6 in the system tray in the Windows taskbar and select Options from the shortcut menu.
2. Check the
Pause On Gaze
checkbox and use the slider to set the amount of time you have to stare at the eye control
camera to pause the eye control.
3. At Wake On Gaze , set the time you have to stare at the eye control camera to end sleep mode and end the eye
control pause.
6 Sleep mode activating and setting up with gaze (Tellus i6)
1.
Right-click
Tellus6
in the system tray in the Windows taskbar and select
Options
from the shortcut menu.
2. Check the Sleep On Gaze checkbox and use the slider to set the amount of time you have to stare at the eye control
camera to activate sleep mode.
3. At Wake On Gaze , set the time you have to stare at the eye control camera to end sleep mode and end the eye
control pause.
F Settings
3 Setting the volume amplification factor
29