Jabbla SMART 3, Руководство пользователя

Страница: 94 / 116

Smart
94
L Communication
4 Adding an environmental control action
4 Adding an environmental control action
If you add one of the Environmental controls to a square in the communication grid, then by selecting the square you can control a
device in your environment.
1 Select Edit > Edit mode .
2 Double-tap on a square you want to insert an action into.
3 Select Environmental control from the Actions options group.
4 From the Actions > Environmental control drop-down list, select one of the following options:
Pause If necessary, in the Duration field, change the number of milliseconds you want the pause to last.
The pauze action is used to create time between 2 environmental control actions.
For example: if a device does not accept a rapid succession of signals.
IR1 You can enter your own user-defined name here for this particular environmental control action. If necessary, go to the
Repeat field, to change the number of times you want the signal to be transmitted.
For example: if you want to increase the volume of a device significantly without the need to tap the square 10 times, you
can enter
Repeat 10.