J 105 Скачать руководство пользователя страница 50 | Manualshive

Страница: 50 / 52

J 105 Скачать руководство пользователя страница 50

J/105 Owner Guide

......................................................................................................................................................................................................................................................

50

Sealants

-‐ used for deck hardware can last anywhere from 3 -‐10 years depending on the stress

exerted on the   hardware.    If most of your hardware   is still original, you should consider backing
off the fasteners and   rebedding   with   Sikaflex.    Jib and   genoa   tracks are usually the first areas to
start to leak over   time.    Stanchion set screws   should be re-‐inspected and replaced when
necessary.

Additional Remarks

There are few industry guidelines regarding pro-‐active maintenance, inspection and periodic
replacement of key components on aging composite boats.    Many owners rely on reminders from
their boatyards for upgrades or required maintenance.    For trailerable one-‐designs, it’s mostly up
to the owner unless a surveyor gets involved with a pre-‐sale survey, and even then, not all
surveyors   are versed in composites. There are critical areas   on every boat that need to be
vigilantly   looked after and routinely   inspected, and we   strongly   encourage   all owners to   start by
inspecting their boats now to best ensure a long, productive   life.

FOOTNOTE:       The contents of this article are thought to   be accurate, but do   not necessarily
include all of   the possible preventative maintenance suggestions that owners could follow to
ensure   long-‐term, safe operation of their boats.    Boats incur wear and tear in unique   ways. When
in doubt please consult a professional for advice/instruction on maintaining, inspecting,
repairing and/or   operating your   boat.

«
...
48
49
50
51
52
»

Содержание 105





















































Отзывы:

Нет отзывов