J 105 Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 52

J 105 Скачать руководство пользователя страница 32

J/105 Owner Guide

......................................................................................................................................................................................................................................................

32

5.

After fueling, replace the fuel-‐fill   deck plate and clean any spillage. Check belowdeck for
fumes and check the bilge for fuel   leakage. If   fumes or liquid fuel   are present, correct the
situation before proceeding. Open   all hatches and ports to ventilate the boat.

IMPORTANT: In the event   of a serious fuel spillage, STOP FUELING IMMEDIATELY. Replace the
fuel-‐fill   deck plate and notify the attendant. Wash all   traces of   fuel   or source of   fumes; ventilate
the boat. Leave the fuel dock only when you are completely certain that   a potentially dangerous
condition does not exist.

Engine Maintenance

Check   the engine, batteries, and   engine mounts once a month.    Ensure the engine is fastened
securely to the engine mount frames and look for any   problems, such as fuel or oil spillage.    If you
need   help, consult a professional marine mechanic or a licensed   Yanmar repair mechanic.

Run the engine frequently and at occasional high speeds, even if it is not in gear.    One reason why
sailboat engines   may burn out within a few years   is   that they are run infrequently and lubricating
oil is not thoroughly   and   evenly   distributed   on all moving   parts.    Be sure to   check oil and   coolant
levels often.    If   you have any doubts about   the purity of the fuel you are buying, use a strainer to
filter out water and dirt.

«
...
30
31
32
33
34
...
»

Содержание 105





















































Отзывы:

Нет отзывов