J.Sikora – Standard MAX Turntable Manual
13
© 2021 Notable Audio Products | www.notableaudio.com
4.
Set the Turntable Chassis
In this step, you will configure and level the the Turntable’s Chassis.
4.1.
Place the Turntable Chassis
Placing the Chassis is similar to how you
placed the Isolation Base. (Step 1). Start
by placing the 3 Coasters onto the
Isolation Base in the approximate
locations where the Chassis’ Feet will sit.
Place Coasters on Isolation Platform
With the help of a friend, gently lower
the Chassis onto the Coasters on the
Isolation Base.
Once you have lowered the Chassis onto
the Isolation Base, gently slide the
Chassis to the right side of the Isolation
Base in order to leave room for the
second Motor and to not cover the
Speed Controller.
Chassis on Coasters
4.2.
Add Discs to the Feet
Just like you did for the Isolation Base,
the next step is to build another set of
Isolation Discs with the Ball Bearings
and then place them under the Chassis’
Feet. Please refer to Step 3.1 for
detailed procedures
.
Place Isolation Assemblies under the Chassis Feet
Note. In some of the upcoming images, the factory-installed riser is not shown on the Primary Arm
Tower, but it will be on your turntable.
