PAGE 20
SCENECONTROL 500 OPERATING INSTRUCTIONS
Design, Manufacture and Installation of Theatrical Equipment Worldwide
(315) 451-3440
Fax (315) 451-1766
www.jrclancy.com
Rev 1: February 15, 2007
Inches – Displays all distances in inches and thousandths. Display velocities in inches and thousandths per
second.
Feet and Inches – Displays all distances in Feet and fractional inches (resolution to 1/8”). Displays all
velocities in feet and fractional inches per second.
When entering a target with the numeric keypad, targets can be specified using either metric or imperial units.
They will be converted and displayed in the units selected on the System Config window.
TURN OFF SCREEN
"Turn Off Screen" is a button that appears here and on the password entry window. This button can be used
to blank the display screen, putting the system into standby mode when it is not in use for a while. Touch the
screen to “wake the system up”.
LOG IN / LOG OUT
"Log In" is used to open the password entry window to permit the operator to change privilege levels. This is
used when the operator needs to record cues or load a new show, or when accessing other maintenance
functions.
If no password is required for Access Level privileges, then the operator simply touches "Done" to return to
the main screen
"Log Out" is useful if there is an Access Level password and the operator wishes to disable the console
without shutting off the system. "Log Out" will suspend the current operator session, and will require that a
valid password be keyed in before resuming operation.
There are several other buttons on the System Config window that are grayed out, indicating that they are not
accessible under Access Level password privileges. The "Close" button on the System Config window closes
this display and returns to the main screen.
