J. D. NEUHAUS PROFI 25 TI, Руководство по эксплуатации и сборке

Страница: 44 / 64

M
AINTENANCE
8.3. Maintenance and inspection intervals
The specified inspection intervals are valid for use in accordance with the classification. The service life is
approx. 10 years if the device is used in accordance with its classification.
If your product is used more intensively, the intervals are to be shortened accordingly. All operating hours are
translated into full load hours. The theoretical operating time and the interval hours are indicated in full load
hours.
Maintenance and Interval Section / comment
inspection measures
Check control device Daily ,
→
8.7, Page 50
Check direction of movement Daily , → 8.8, Page 50
Check brake function without load Daily ,
→
8.9, Page 50
Visually inspect the buffer of Daily
,
→ 8.10, Page 51
lifting and lowering limiters
Visually inspect the chain Weekly ,
→
8.14, Page 53
Check chain Every 3 months
,
→ 8.14, Page 53
Lubricating the chain As required ,
→
8.6.2, Page 47
Check lifting limiter Annually ,
→
8.11, Page 51
Check lowering limiter Annually , → 8.12, Page 52
Check brake function with nominal load Annually ,
→
8.9, Page 50
Check hook, shackle, eyelets Annually
,
→ 8.17, Page 55
Check silencer Annually ,
→
8.18, Page 56
Check overload protection Annually ,
→
8.13, Page 52
Check all the bolted Annually For tightening torques,
,
→ see spare parts list.
and pin connections
Check the connections Annually Replace damaged parts if necessary
and hose lines for damage
Page 44 of 64 Doc.-No.: VA049318-10-OM-EN-0319-64-2