J/111 OWNER MANUAL
13
Sail Control Systems
After stepping the mast and connecting the boom, QuikVang, Facnor furler, and backstay, rig all halyards and
the remaining sail control systems on deck.
•
Main Halyard:
exits the mast on the port side, runs through a turning block at the mast collar, through
the inboard sheave of the port organizer block and then aft through the inboard Spinlock ZR Jammer
and finally leads to the winch. Owners should familiarize themselves with the use of the ZR Jammer
and train crew how to properly operate.
•
Primary Jib Halyard:
exits the mast to starboard, leads through a mast base block, aft to the inboard
sheave of the organizer and then aft to the single ZR Jammer to starboard. A second jib halyard
leads to port and aft to the inboard position on the double rope clutch.
•
Spinnaker Halyard:
exits the mast to starboard, leads through mast base block, aft to the outboard
organizer sheave and then aft to the outboard position of the double rope clutch to starboard. An
optional Spinnaker halyard is available and exits the mast to port.
•
Mainsheet Traveler:
is a 4:1 Harken low friction Big Boat system. The purchase system on each side
controls a Harken traveler car mounted on the track (see diagram for set--up).
•
Outhaul:
is an internal 12:1 system adjusted at the cleat on the underside of the boom and comes
pre-assembled from Hall Spars.
•
Cunningham:
The cunningham is a simple 5:1 system that is installed at the mast. See diagram for
details.
•
Mainsheet:
system is a 6:1/24:1 system (see diagram). The system includes a strop for the rough
tune to minimize length of line in cockpit. The system is designed to allow easy and quick adjustments
of the mainsheet with power on the fine tune for highly loaded adjustments. The hardware is within
easy reach of the wheel and facilitates short-handed sailing.
•
Jib Sheet:
attaches to the headsail and leads to the adjustable jib block on the track, aft to the
deflector eye on the deck and then directly to the primary winch.
•
Spinnaker Gear:
The J/111 has padeyes installed on the hull edge outboard of the cockpit for
spinnaker sheet blocks. See the deck hardware layout diagram for more info.
Содержание J/111
