IXXAT CANio 500, Быстрый старт, Страница: 9 / 31

LED displays
Copyright IXXAT Automation GmbH
9
CANio 500 Quickstart Manual, version 1.3
2.4 Connector (X4) analog
The analog signals are available on connector X4. Connector X4 is designed
as a 15-pin high density D-Sub HDM15 (pins, male) (see table 2-4).
The functions of the analog inputs and outputs are described in chapters 4.5
and 4.6.
Pin no. X4 Signals Description
1 ANA_IN1_P Analog input 1 positive (+)
2 ANA_IN2_P Analog input 2 positive (+)
3 GNDA Analog ground
4 ANA_IN3_P Analog input 3 positive (+)
5 ANA_IN4_P Analog input 4 positive (+)
6 ANA_IN1_M Analog input 1 negative (-)
7 ANA_IN2_M Analog input 2 negative (-)
8 GNDA Analog ground
9 ANA_IN3_M Analog input 3 negative (-)
10 ANA_IN4_M Analog input 4 negative (-)
11 ANA_OUT1 Analog output 1
12 ANA_OUT2 Analog output 2
13 GNDA Analog ground
14 ANA_OUT3 Analog output 3
15 ANA_OUT4 Analog output 4
Table 2-4: Pin assignment analog interface connector D-Sub HDM15
3 LED displays
The CANio 500 has four two-colored LEDs (see Figure 2-1). The LEDs react
as follows according to the operating mode of the CANio 500.
3.1 PWR - LED
The Power-LED (PWR) is lit green when the CANio 500 is connected to the
power supply. The Power-LED (PWR) is lit red when the power supply is con-
nected with reverse polarity.