IXSEA Oceano HD-100 Lift, Руководство пользователя

Страница: 14 / 34

Oceano HD100 Lift - User Guide
III.2 Checking the Acoustic Link
The aim of these operations is to check the good operation of the acoustic link between
remote control transmitter and acoustic actuator AR/RT 861 S.
Please refer to the TT801 user guide for the detail procedure.
Caution
I
F RECEPTION IS NOT SUCCESSFUL
,
CHECK THE CODE AND REPEAT THE PROCEDURE
.
O
THERWISE CHECK THAT
:
- T
HE DUNKING TRANSDUCER OF THE SURFACE REMOTE CONTROL UNIT DOES NOT BUMP AGAINST
THE HULL OF THE VESSEL
.
- T
HE VESSEL IS NOT MOVING TOO QUICKLY CAUSING EDDIES OR TURBULENCE AROUND THE
ACOUSTIC HEAD
.
- N
O FREQUENCY OR CODE ERROR HAS BEEN MADE
.
- M
AKE SURE THAT THE DUNKING TRANSDUCER IS DEPLOYED AT SUITABLE DEPTH AND AS FAR AS
POSSIBLE FROM ANY SOURCES OF VIBRATIONS OR POTENTIAL ACOUSTIC NOISE SUCH AS
BUBBLES
,
PROPELLER TURBULENCE
,
WATER OUTLETS
,
AUXILIARY ENGINES
…
III.3 Connecting the Load to the HD100
Procedure
Step Action
1.
Connect the ring (ref.: 910 2719) to the load.
2.
Connect the release system hook to the ring (ref.: 910 2719).
3.
Make sure that the two ROV handles (ref.: 910 3203) are in position and that the locking
pins are in place (ref.: 910 2729B) and locked with cotter pins (2.5 x 32).
The HD100 unit is now ready to operate.
4.
End of procedure.
MU – HD100L – AN – 001 - Ed A – January 2010 8