The Tastic may be installed between joists using the inbuilt clip fasteners. Alternatively, the unit can
be installed against a joist using two screws through holes located in the flange (Fig. 4 on page 7),
provided that the clearances for the two vertical sides are maintained as per Fig. 3 on page 7.
Depending on your model, the Tastic has a weight of 2 – 3.5 kg (see below). If adequate support is not
available for the Tastic, it may be necessary to provide extra strengthening.
Eco Triumph – approx 2 kg
Eco Sensation/Eco Silhouette – approx 3.5 kg
IMPORTANT:
Joists, beams and rafters shall not be cut or notched to install the appliance.
Fitting Triumph Back Draught Flaps
10
Installation
Tastic
®
Back draught collar is fitted
upside down when packed.
Thicker rim of back draught
collar should now face
towards Tastic body.
Lift back draught collar up.
Fit back draught collar
to Tastic.
Turn the back draught
collar over.
Attach back draught flaps so
that they open outwards away
from the fan as pictured.
Содержание Eco Tastic 12343
Страница 19: ...Notes Tastic...