background image

Installation or Product problems? Do not return to store of purchase.

Contact Canarm Service at 1-800-265-1833 (CANADA) 1-800-267-4427 (U.S.A.)

1-800-567-2513 (EN FRANCAIS) Monday to Friday 8:00 - 5:00pm e.s.t.

WARRANTY

CANARM Ltd. warrants every new fan to be free of defects in material and workmanship, to the extent

that, within a period of one year from the date of purchase CANARM Ltd. shall either repair or replace

at CANARM’s option, any unit or part thereof, returned freight prepaid, and found to be defective.

This warranty does not include any labour or transportation costs incidental to the removal and

reinstallation of the unit at the user’s premises.

Components repaired or replaced are warranted through the remainder of the original warranty

period only.

This warranty applies to the original purchaser-user only; it is null and void in case of alteration,

accident, abuse, neglect, and operation not in accordance with instructions.

NOTICE:

No warranty claims will be honored by CANARM Ltd. unless prior authorization is obtained.

PLF Series Fans

Instruction Manua

l

READ AND SAVE THESE INSTRUCTIONS

M0017 - Rev. 5 - Rev Date: 22/04/03

Page 1 of 5

Summary of Contents for PLF09













Reviews: