IWILL MPX2, Руководство пользователя, Страница: 57 / 106

4: Installing The Motherboard
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
User’s Manual 4•13
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Connecting Front Panel Components
After the motherboard is installed in the system housing,
you should connect whatever front panel components
the housing has to the Front Panel feature connector on
the motherboard.
The figure below indicates the pin assignments of the
connector for your reference.
Front Panel feature connector
Front Panel Connector:
Leads from the front panel
features connect to this
header.
System LED
Power On
Speaker
IDE LED ACPI Reset
Completing System Configuration
Once the motherboard is installed in the system housing,
you can proceed to connect or install whatever internal
devices you will use to complete the system. These will
at least include an AGP display card and disk drives and
connecting the housing power supply leads.
Power Connectors:
The power connectors are
for use with either an ATX
or EPS minimum 350W
power supply.
Please note that ATX con-
nectors plug into only part
of the larger connectors,
as noted in the illustra-
tion. the motherboard
comes with stickers over
the unused sections. if you
will use an EPS power sup-
ply, remove the stickers.
24-pin EPS/ATX connector
(ATX uses 20 pins)
EPS/ATX 12V connector
(ATX uses 4 pins)
ATX connectors
plug into the
indicated
positions
Cover sticker –
remove to use EPS
power supply
Cover sticker –
remove to use EPS
power supply