IWILL MPX2, Руководство пользователя, Страница: 40 / 106

MPX2 Motherboard
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
User’s Manual 3•4
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Hardware Configuration Jumpers
Jumper JP5: Frontside Bus Speed
This jumper sets the Frontside Bus (FSB) speed. The de-
fault setting is 133MHz. This is compatible with PC2100
memory. If you want to use PC1600 memory, set this
jumper to the 100MHz setting. This will slow the CPU
down if it uses a 266MHz Frontside Bus.
JP5: Frontseide Bus Speed
Setting Function
Short 3 & 5 100MHz - Frontside Bus speed is 100Mhz
4 & 6
Short 1 & 3 133MHz [Default] - Frontside Bus speed is 133Mhz
2 & 4
J8: Keyboard Power On
Setting Function
Short 1-2 Normal [Default]
Short 2-3 Power On [Enables the use of the KB Power On feature]
Jumper J8: Keyboard Power On
This jumper controls the Keyboard Power On feature at
the hardware level. The default setting is Normal, which
does not enable this feature. To use this feature, you must
set this jumper to the Power On setting. You can then
configure the feature in the Integrated Peripherals sec-
tion of the CMOS Setup Utility before you use it. See
Chapter 5 for more information on this.
Default – 133MHz
Default – Normal
Pin 1
Pin 2
Pin 5
Pin 6
Pin 1