IWILL MPX2, Руководство пользователя, Страница: 52 / 106

MPX2 Motherboard
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
User’s Manual 4•8
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Installing System Memory
This section details the procedure for installing system
memory on the motherboard. Correct memory configu-
ration is critical for proper system operation. Please re-
view this section carefully and follow the configuration
guidelines precisely.
Memory Specifications
The motherboard has four DIMM module sockets. This
motherboard uses DDR SDRAM DIMM modules for sys-
tem memory. The system memory specifications are:
• PC1600 or PC2100 DDR SDRAM DIMM modules.
• Uses 64MB, 128MB, 256MB, 512MB or 1GB DIMMs.
• Maximum 2GB unbuffered and 3.5GB registered to-
tal system memory.
Memory Configuration Options
This motherboard has flexible memory configuration
options. Please note the following:
• Supports any mix of 64MB, 128MB, 256MB, 512MB
and 1GB modules.
• Any capacity DIMM may be used in any socket as
long as the total memory limit is not exceeded.
• Modules should be the same speed for best system
performance.
• Both unbuffered and and registered DDR SDRAM
are supported.
• Do not mix unbuffered and registered memory.
Registered Memory:
If you install registered
DDR memory, the chipset
supports upto 3.5GB total
system memory. If you in-
stall four 1GB modules,
the system will only rec-
ognize 3.5GB.
Unbuffered Memory:
If you install unbuffered
DDR memory, the chipset
supports upto 2GB total
system memory only in-
stalled in the DIMM1 &
DIMM2 sockets.