IWILL MPX2, Руководство пользователя, Страница: 26 / 106

MPX2 Motherboard
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
User’s Manual 2•12
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
IR Connector JP2
Function: Connector for an Infrared (IR) port module.
Description: The IR connector supports both IrDA and
ASKIR infrared port modules. Follow the module’s in-
structions to install it.
More Information: Please see the Integrated Peripherals
section of “Configuring the CMOS Setup Utility” in Chap-
ter 5 for information.
IR connector JP2
IR Connector JP2:
The IR connector is for
both IrDA and ASKIR port
modules. You must config-
ure the Super IO section
of the Integrated Periph-
erals screen in the CMOS
Setup Utility to use the IR
feature.
WOM: Wake On Modem Connector J5
Function: A connector for the lead from a modem that
supports the Wake On Modem feature.
Description: This feature enables the system to “wake
up” from Suspend mode when it receives a ring signal
from a modem it is connected to. It works with a modem
PCI expansion card that supports the feature by connect-
ing the card to the WOM connector on the motherboard.
A signal from the card will wake up the computer only
when it is plugged into an AC power source and the sys-
tem is in a supported sleep state.
More Information: Please see the Power Management
Setup section of “Configuring the CMOS Setup Utility”
in Chapter 5 for information.
Wake On Modem
Connector:
This connector is for the
lead from a PCI modem
card that supports this
feature. The lead plugs
into the connector.
Wake On Modem connector