REL1.1
Page 55 of 89
iWave Systems Technologies Pvt. Ltd.
Zynq-Ult MPSoC SOM Development Platform Hardware User Guide
2.5.3
FMC HPC Connector2
The Zynq Ult MPSoC Carrier board supports two 400Pin Standard FMC HPC connectors to support standard
ANSI/VITA 57.1 FMC modules. These FMC HPC connectors can accept two Single width FMC modules or one double
width FMC module.
The FMC HPC Connector2 (J6) supports the below mentioned interface from Zynq Ult MPSoC.
•
6 GTH High Speed Transceivers
•
2 GTH Reference Clock Capable
•
15 LVDS IOs/30 Single ended (SE) IOs
•
4 Single ended (SE) IOs
•
2 Clock Input Capable LVDS/SE pins
•
1 Clock Output Capable LVDS/SE pins
This 400Pin FMC HPC Connector2 (J6) is physically located at the top of the board as shown below.
Figure 22: FMC Connector2
