REL1.3
Page 56 of 80
RZ/G1M/G1N Qseven SOM Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
1.1.1
SPI Programming Header
To program the boot code in to the SPI flash (for the first time or if boot code is corrupted), use iWave RZ/G1M/G1N
SPI Programmer Board through SPI Flash Programming Header (Example part: TMM-103-01-L-D).Optionally the
external SPI programmer can be used for programming the SPI flash through SPI Flash Programming Header (J1)
Optionally JTAG debugger through JTAG Header (J4). Optionally the external SPI programmer with 8pin SOIC test clips
(Example part: 923655-08 from 3M) can be used for programming the SPI Flash.
Figure 9: SPI Flash Programming Header
Number of Pins
- 6
Connector Part
- TMM-103-01-L-D from Sullins Connector Solutions
Mating Connector
- 79107-7002 from Sullins Connector Solutions
Table 9: SPI Header
PIN
Number
Signal Name
Signal Type/
Termination
Description
1
SPI_MISO
I, 3.3V CMOS
SPI Master Input Slave Out
2
SPI_CS
O, 3.3V CMOS
SPI Chip Select
3
SPI_MOSI
O, 3.3V CMOS
SPI Master Out Salve In
4
GND
Power
GND
5
VCC
Power
3.3 Power Supply
6
SPI_SCK
O, 3.3V CMOS
SPI Clock
Содержание iW-RainboW-G20M
