55
O
pe
ra
tion
Push the right key to select "EXT" and the Enter key to enter that choice.
Waiting state display
*The pump enters the analogue preset, analogue variable, pulse, batch or interval batch mode.
Push the start/stop key to start operation. The pump runs along with operation program
-
ming and the external signal. Pushing the same key again stops operation.
In the analogue variable control mode, the current value will show up when the key is pushed. Push
the key to return
.
The operation LED turns green during operation.
AUX function
Operation at an AUX speed starts while receiving the external signal via the AUX terminal when the IX is run-
ning in manual mode or EXT mode. Set an AUX speed before operation. See page 51 for detail.
Priming function
This key operation runs the pump at the maximum stroke rate in operation.
Press and hold both the
UP
and
DOWN
keys.
The pump runs at the maximum stroke rate while both the keys are pressed.
*
Thi
s function is available at any time except when the MAN/EXT selection or the menu screen is
opened.
1
Operation
3
4
