− 15 −
INPUT
Purpose of wiring
Pin No. Marker Tube No.
1P
25
Power supply for Electro-pneumatic regulator (Red)
2P
26
Input signal for Electro-pneumatic regulator (White)
3P
27
GND for Electro-pneumatic regulator (Black)
Connection between FDC-1 and
Electro-pneumatic regulator
Wiring objects
INPUT
Purpose of wiring
Pin No.
Marker Tube No.
1P
28
DC24V Power
2P
29
GND
Connection between FDC-1 and
power supply (Note)
Wiring objects
Note: Please provides DC24V power supply with 1A or more.
CN5 Chart 6
Note: Wiring is not needed when electro-pneumatic regulator is not used.
CN6 Chart 7
Chart 8 Table of wiring devices
FDC-1 side
connector
Contact
Wire
Remarks
Cross section mm
2
AWG
CN1
VHR-8N
BVH-21T-P1.1
0.5
20
8 wires, 5m or less
CN2
VHR-4N
BVH-21T-P1.1
0.5
20
4 wires, 5m or less
CN3
XHP-8
BXH-001T-P0.6
0.3
22
8 wires, 5m or less
CN4
XHP-4
BXH-001T-P0.6
0.3
22
4 wires, 5m or less
CN5
XHP-3
BXH-001T-P0.6
0.3mm
2
, Outer dia.
φ
5.9
4 wires shield cord
、
5m or less
CN6
VHR-2N
BVH-21T-P1.1
0.5
20
2 wires, 5m or less
Note 1: Use the connector and pin made by J.S.T. Mfg. Co., Ltd.
2: For the wiring of CN5, use Omron made XS2C-D422 as electro-pneumatic regulator side I/O connector. Refer
to Chart 9) for connection.
Chart 9 Wiring of electro-pneumatic regulator
FDC-1 side
connector
Electro-pneumatic regulator
side I/O connector
1P
1P
2P
4P
3P
3P
Note: Connect shield cord to 3P of FDC-1 side connector XHP-3.
