IVT ROS-150GD, Инструкция по эксплуатации

Страница: 6 / 56

6
Instruction manual
EN
PART LIST
1. On/Off switch
2. Ventilation slots
3. Dust extraction connection
4. Sanding plate
5. Speed selector thumbwheel
6. Dust bag
7. Lock-on button
8. Auxiliary handle
CONTENT OF THE BOX
Instruction manual (1 pc), sanding paper (1 pc), dust
bag (1 pc).
INTENDED USE
This model of rotary sander is intended for dry sanding
of surfaces of wood and plastic as well as for painted
surfaces. It is particularly suitable for working on
profiles, in comers or hard to reach areas.
SAFETY REGULATION FOR THE USE
General safety rules
The following listed safety instructions should serve
you for the right use of the tool and for the protection
of your own safety, therefore, please read this very
carefully. When passing this tool to a third person, these
instructions must be handed too. Retain this user’s
manual and all other literature supplied with your tool
for any future reference. Comply with all the safety
information and the warnings on the tool. Be familiar
with the controls and the proper use of the tool before
attempting to use it and above all, make sure you know
how to stop to use it in case of emergency. Following
these simple instructions will also maintain your tool in
good working order.
∙
The tool must be assembled correctly before use.
∙ Only use the tool for its designed purposes.
∙
On the tool, there may be also decals and further
indications about the safety equipment to use that
must be considered. The prevention of accidents is
dependent upon the awareness, common sense and
proper training of everyone involved in the operation,
transport, maintenance and storage of the tool.
∙
Never leave the tool unattended.
∙ Never allow children to use the tool. Children
should be supervised to ensure that they do not play
with the tool.
∙
Keep children and pets away. All onlookers should
be kept at a safe distance away from the tool when it
is in use.
∙ The user is responsible for third parties while
working with the tool.
∙ People who aren’t acquainted with the operating
instructions, children, juveniles who have not yet
reached the minimum age for using this tool and people
under the influence of alcohol, drugs or medication
are not allowed to use the tool. Local regulations may
restrict the age of the operator.
WARNING! The consumption of
alcohol, medication and drugs, plus
states of illness, fever and fatigue will
affect your ability to react. Do not use
this tool in any of these situations.
∙ Make sure that all the protective devices (if present)
are fitted and are in good condition.
∙ Never operate the tool with defective safety devices
or guards (if present), or without safety devices in place.
∙ Inspect the entire tool to look for loose parts (e.g.
nuts, bolts, screws, etc.) and for any damage. Check
at frequent intervals if screws and bolts (if present)
are properly tight to be sure the equipment is in safe
working condition. Repair or replace them, if necessary,
before using the tool. Serious injury to the operator and
TOOL SPECIFICATIONS
Model ROS-150GD
Voltage ~ Frequency [V ~ Hz] 230 ~ 50
Rated power [W]
430
Sanding surface [mm] 150
Vibration level [m/s
2
] 10.8 (K=1.5)
Sound pressure level [dB(A)] 81 (K=3)
Sound power level [dB(A)] 92 (K=3)
Weight [Kg] 2.2
Safety class II