ITW SIMCO ION IQ Power HLC, Инструкция по установке и эксплуатации

Страница: 15 / 36

12 IQ Power HLC Power Supply
& Control Station 5201259 Rev. D
The Control Station can be used to automatically address the power supplies.
The default Power Supply Number for a new unit is “1”. Plug first HLC
(only) into Control Station and turn Control Station on. Allow Control Station
to boot-up and begin operation. Plug second system into Control Station. The
Control Station will re-address the second HLC to “2”. Plug third system into
Control Station. The Control Station will re-address the third HLC to “3”.
Repeat this process until all power supplies (or IQ Power / IQ Easy devices) are
installed. Each power supply or device will be given a unique address (device
number).
IQ Power HLC power supplies may also be manually re-addressed through the
Control Station.
See Power Supply Number (Address / Device Number) section.