ITW Simco-Ion IQ Power Fantom, Инструкция по установке и эксплуатации

Страница: 11 / 24

9 IQ Power Fantom 5201292 Rev A
Figure 7. IQ Power Crossover Modular Cable (black)
Connection with a Control Station allows two-way digital communication with the
Fantom Wide Blower. The Control Station is able to display a variety of operating
parameters and settings in the Fantom Wide Blower. If a Control Station is
connected to the Fantom, but the Fantom is not powered or turned off, the Control
Station will still be able to display the fixed settings in the Fantom Wide Blower.
NOTE – When a Fantom Wide Blower is connected to a Control Station,
the Fantom still requires connection to line voltage to operate.
System Configuration
The Fantom Wide Blower and related Control Station / IQ Easy Sensor Bar
can be configured in a variety of ways. When an ionizing blower is paired with
a static sensor bar, the pair is considered a single device by the Control Station.
The following figures each illustrate a fundamental configuration with specific
equipment. Fundamental configurations may be combined on a system to meet the
particular needs of the application.